Heatingspares247.Com

read moreKey Features

Carbon monoxide measurement (0 to 20%)
Carbon dioxide measurement (0 to 2000ppm)
Incorporated wireless connection
Differential temperature and pressure measurement
Hydrogen (H2) ready up to 20% blend
Oxygen content calculation
Excess air calculation
CO/CO2 ratio calculation
Efficiency calculation
Let by/tightness testing
Automatic commissioning test sequence on boilers
Purge pump system protects CO sensor from over range
Suitable for wide range of fuels
Kane 458s 10 Year Warranty

part number: Kane 458s
Replaces: Kane 425, Kane 455, Kane 458, Kane 458

read moreThe intaKlean 2 triple action magnetic central heating filter, featuring intas unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.

As well as separating magnetic debris and trapped air in circulating system fluid, intaKlean 2 also includes a completely unique non-ferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre.

As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained. The remaining magnetic debris is then drawn to the center of the filter and captured by the 11,000 gauss rare earth neodymium magnet.

Features:

Triple action filter - removes magnetite, non-ferrous debris and trapped air

Features our unique double gauze non-ferrous filter - system fluid passes through two heavy duty stainless steel mesh filters, breaking up and retaining all non-ferrous system debris.

Fully removable 11,000 Gauss magnet - service the system live by withdrawing the magnet from the filter without the need for isolation, or system drain down.

Low profile drain valve - drain the filter contents without draining the system.

500ml filter pot volume - ideal for chemical dosing

Un-blockable even if the IntaKlean 2 isn't serviced, it will never inhibit system performance as its unique diverter block connection means that it will never block

Full bore isolating ball valves - doesn't inhibit flow avoiding putting pressure on system pumps

Easy clean, easy drain design effortless service calls for the installer

Two year guarantee - complimented by a dedicated Technical Support helpline

Specifications:

Part Number: IK2MF22Replaces Part Number: IKMF22,Inta-Klean, Inta, Intaclean, Inta-Clean

read moreThis Vokera Ignition PCBis suitable for Vokera:

Linea 24,Linea 28,Linea 726,Linea 730,Linea 735,Linea Plus AG

Mynute 28 E,Mynute 35 E,Synergy 25E,Synergy 29,Synergy 29E

Syntesi 25,Syntesi 25E,Syntesi 29,Syntesi 29E,Syntesi 35

Part Number: 10028891

Replaces Part Number: 10021848, R10021848, R10028891

read moreThis PCB fits the following Ideal Boilers:

Isar HE 24,Isar HE 30,Isar HE 35

Domestic Icos HE 15,Domestic Icos HE 18,Domestic Isar HE 24

Domestic Isar HE 30,Domestic Isar HE 35,

Domestic Istor HE260,Domestic Istor HE325

Replaces Part Number: 173534, 173672

Part Number: 174486

read moreA solid acrylic gauge in a tough metal casing.

Measures to 18in.w.g. or 45 mbar.

Easy zero adjustment and a clear accurate scale.

Blue fluid for ease of reading in poorly lit locations.

Trap chambers reduce the possibility of fluid loss through spillage or overpressure.

Hanging slot and strap.

Overall length - approx. 18in (450mm).

Supplied in a nylon protective bag.

Please note: use only 1.88 SG fluid (REGU70).

Part Number: REGU35

read moreThis Ferroli Universal Time Clock fits the following Boilers:

Suitable for:

Ferroli Combi 100 FF

Ferroli Combi 76 FF

Ferroli Combi 77 CF

Ferroli Combi 77 FF

Ferroli FALCON II

Ferroli F24 B

Ferroli F30 B

Ferroli F30 E

Ferroli Modena 102 MF03

Ferroli Modena 102/1 MF03

Ferroli Modena 80 E MF01

Ferroli Modena 80 E MF02

Ferroli Modena 80 E MF03

Ferroli Modena 80/1 MF03.1

Ferroli Optima 200

Ferroli Optima 2000

Ferroli Optima 2001

Ferroli Optima 201

Ferroli Optima 700

Ferroli Optima 701

Ferroli Optima 800

Ferroli Optima 901

Part Number: ZU39803831Replaces Part Number: 39803831, 1KWMR30K, 39803831, 39803840,803840, 1MAN03010/0, ZU398038

read moreThis Vaillant Pump fits the following Boilers:

Vaillant EcoTec Plus:

612 VU 126/3-5

612 VU 126/3-5 R1

615 VU 156/3-5

615 VU 156/3-5 R1

618 VU 186/3-5

618 VU 186/3-5 R1

624 VU 246/3-5

624 VU 246/3-5 R1

630 VU 306/3-5

630 VU 306/3-5 R1

824 VUW 246/3-5

824 VUW 246/3-5 R1

831 VUW 316/3-5

831 VUW 316/3-5 R1

Part Number: 178983

Replaces Part Number: 193534

read moreThis part is suitable for:

Vaillant AquaPlus

Vaillant Ecomax 824/2E

Vaillant Ecomax 828/2E

Vaillant Ecomax 835

Vaillant Turbomax Plus 824

Vaillant Turbomax Plus 828

Vaillant Turbomax Pro 24

Vaillant Turbomax Pro 28

Vaillant ecoTEC Exclusive 832

Vaillant ecoTEC Exclusive 838

Part Number: 252457

read moreSuitable for:

Vaillant Ecotec Plus 831

Vaillant Ecotec Plus 837

Vaillant Ecotec Plus 937

Vaillant Ecotec Pro 24

Vaillant Ecotec Pro 28

Part Number: 0020132764Replaces Part Number: 0020107811, 117322, 0020052093, 0020028060, 0020049121

read moreFeatures:

Kane 458s Pro Kit
Kane 458s Flue Gas Analyser ✔

Wireless Connectivity ✔
Probe ✔
Pressure Connectors ✔
CO Sensor Purge Pump Protection ✔

KANE IRP-2 Infra-red printer ✔
Air/liquid temperature probe ✔
GLD450 Plus Gas Leak Detector ✔
Pipe Clamp Temperature Probes- 2
Pressure connection hose ✔
Calibration Report ✔
Carry Case ✔

Part Number: Kane 458s Pro Kit
Replaces: Kane 425, Kane 455 Pro Kit, Kane 456 Pro Kit, Kane 458 Pro Kit,

read moreDescription:

The intaKlean 2 triple action magnetic central heating filter, featuring intas unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.

As well as separating magnetic debris and trapped air in circulating system fluid, intaKlean 2 also includes a completely unique nonferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre.

As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained. The remaining magnetic debris is then drawn to the centre of the filter and captured by the 11,000 gauss rare earth neodymium magnet.

Features:

Triple action filter - removes magnetite, non-ferrous debris and trapped air

Features our unique double gauze non-ferrous filter - system fluid passes through two heavy duty stainless steel mesh filters, breaking up and retaining all non-ferrous system debris.

Fully removable 11,000 Gauss magnet - service the system live by withdrawing the magnet from the filter without the need for isolation, or system drain down.

Low profile drain valve - drain the filter contents without draining the system.

500ml filter pot volume - ideal for chemical dosing

Un-blockable even if the IntaKlean 2 isn't serviced, it will never inhibit system performance as its unique diverter block connection means that it will never block

Full bore isolating ball valves - doesnt inhibit flow avoiding putting pressure on system pumps

Easy clean, easy drain design effortless service calls for the installer

Two year guarantee - complimented by a dedicated Technical Support helpline

Specifications:

Actively filters magnetite and non ferrous system debris

Unique double gauze non-ferrous filter

Low profile drain valve

Fully removable 11,000 Gauss magnet - sevice the system live

360 installation

Quality isolation valves

90C max working temperature

Manual air vent

4 bar max working pressure

Part Number: IK2MF28Replaces Part Number: IKMF28, Inta-Klean, Inta, Intaclean, Inta-Clean

read moreSuitable for:

Main Multipoint BF

Part Number: 5110963

read moreSuitable for:

Vokera Linea 28 HE

Vokera Linea 32 HE

Vokera Linea 36 HE

Part Number: 20007052Replaces Part Number: 20000498, 10029212, 10026240

read moreSuitable for:

Chaffoteaux Britony Combi SE 100

Chaffoteaux Britony Combi SE 80

Chaffoteaux Britony Combi SE 80 With& without Timer

Part Number: 60000571Replaces Part Number: 61308723, 1308723, 1308722

read moreAbout:
For measuring water flow rate.
Suitable for Benchmark testing.
Splash guard to protect hands from hot water.
Dual Scale - 1/2 to 5 gallons per minute and 2 to 23 litres per minute.
Can be adjusted for left or right hand use.

Part Number: REGM33

read moreDescription:

Grundfos 15-50/15-60 Pump

Compact size and standard port to port dimensions for easy fitting and for interchange with old pumps.

Three speed motor for energy efficiency and precise system matching

Part Number: UPS2Replaces Part Number: 98334549, 65047568, 98119377

read moreKane Flue Gas Analyser 458s

Kane Flue Gas Analyser 458s is a professional-level instrument, capable of measuring a formidable range of variables and used for commissioning and performing maintenance on gas systems & boilers. With direct CO, CO2 & CO sensor protection, the device measures carbon dioxide directly (0-20%), carbon monoxide (0 to 2000ppm), differential temperature, differential pressure and is hydrogen (H2) ready (up to 20% blend). These measurements allow the analyser to calculate various aspects of combustion including oxygen content, excess air, CO/CO2 ratio, combustion efficiency and in addition to let by/tightness testing. Test domestic gas, oil, biomass & some light commercial appliances with this completely upgradeable flue gas analyser, featuring wireless connectivity included as standard.

The CO measurement capabilities of the Kane 458s Flue Gas Analyser are particularly impressive. With the latest upgradeable sensor technology protected by an innovative purge pump system providing accidental over range protection for the CO sensor, it can measure ambient CO in addition to CO in the flue. An automatic commissioning test means that the user can perform a test conforming to Technical Bulletin 143 without having to manually pick the test sequence. With the extremely versatile Kane 458s Flue Analyser you can even specify additional sensors either from new or as required.

The large display of the Kane 458s Gas Analyser presents up to six readings simultaneously alongside an easy to use ergonomic rotary dial. The smart design is encased in a robust shell, offers connection to an optional infrared printer through the built-in wireless connectivity alongside a Kane ten year warranty for your flue gas analyser. The Kane 458s is ideal for a range of applications including testing combustion performance, combustion efficiency, CO build-up, tightness and let by and flue draught. The analyser can be used on an array of fuel types such as natural gas, butane, propane, LPG, 28 sec oil, 35 sec oil and wood pellets. The flue gas analyser is available in a range of kits with various accessories as detailed below

Key Features
Carbon monoxide measurement (0 to 20%)
Carbon dioxide measurement (0 to 2000ppm)
Incorporated wireless connection
Differential temperature and pressure measurement
Hydrogen (H2) ready up to 20% blend
Oxygen content calculation
Excess air calculation
CO/CO2 ratio calculation
Efficiency calculation
Let by/tightness testing
Automatic commissioning test sequence on boilers
Purge pump system protects CO sensor from over range
Suitable for wide range of fuels
Kane 10 Year Warranty
Supplied Accessories
Probe
Pressure Connectors
USB Charger
Quick reference guide & analyser calibration certificate

Standalone AnalyserStandard KitPRO KitCPA1 KitOil Kit
Kane 458s Flue Gas Analyser ✔ ✔ ✔ ✔ ✔
Wireless Connectivity ✔ ✔ ✔ ✔ ✔
Probe ✔ ✔ ✔ ✔ ✔
Pressure Connectors ✔ ✔ ✔ ✔ ✔
CO Sensor Purge Pump Protection ✔ ✔ ✔ ✔ ✔
KANE IRP-2 Infra-red printer ✔ ✔ ✔ ✔
Air/liquid temperature probe ✔ ✔
GLD450 Plus Gas Leak Detector ✔ ✔
Pipe Clamp Temperature Probes - - 2 2
Pressure connection hose ✔ ✔
ASP2 Appliance Sampling Probe Kit ✔
Oil pressure test set ✔
Calibration Report ✔ ✔ ✔ ✔ ✔
Carry Case ✔ ✔ ✔ ✔

Kane 458s & Kane 258 Analysers

The Kane 458s Flue Gas Analyser is a formidable tool capable of completing a variety of tasks crucial for commissioning and performing maintenance on gas systems & boilers. The Kane 258 Combustion Flue Gas Analyser meanwhile is an ideal instrument ideal for servicing or installing oil or gas boilers, with less features than the 458s but more affordable.

Kane 258KANE 458s

Applications

Combustion Performance ChecksYesYes
Combustion Efficiency ChecksYesYes
CO safety checks-Yes
Flue Draughts-Yes

Measures
CO 0 - 2,000pmYesYes
O2 0 - 21%YesYes (option)
Differential Temperature-Yes
CO2 direct with an Infra-Red sensor 0 - 20%-Yes
Differential pressure meter +/- 80mbrar-Yes
NO 0 - 600ppm-Yes (option)
CO 0 - 10,000ppm-Yes (option)

Calculates
CO2 0 - 20%YesYes
CO / CO2 ratioYesYes
Excess AirYesYes
Combustion EfficiencyYesYes
O2-Yes

Contents

AnalyserYesYes
ProbeYesYes
USB ChargerYesYes
IRP-2 Infrared PrinterYes (option)Yes (option)
Carry BagYes (option)Yes (option)
Pressure Connectors-Yes
Air / Liquid temperature probe-Yes (option)
GLD450 Plus Gas Leak Detector-Yes (option)
Pipe Clamp Temperature Probes-Yes (option)
Pressure Connection hose-Yes (option)
ASP2 Appliance Sampling Probe Kit-Yes (option)
Oil Pressure test set-Yes (option)
Includes Wireless Module
Transfer analyser readings to your PC using a KANE LIVE software.
Send printout data to your mobile device using the free Kane printer app.

BTM/450
Wireless android module
BTM/450LE
Wireless iOS module

Part Number: Kane 458s CPA1 Kit

Replaces: Kane 425, Kane 455 Cpa1 Kit, Kane 456 CPA1 Kit, Kane 458 Cpa1 kIT

read moreKane Flue Gas Analyser 458s Kit

Kane Flue Gas Analyser 458s is a professional-level instrument, capable of measuring a formidable range of variables and used for commissioning and performing maintenance on gas systems & boilers. With direct CO, CO2 & CO sensor protection, the device measures carbon dioxide directly (0-20%), carbon monoxide (0 to 2000ppm), differential temperature, differential pressure and is hydrogen (H2) ready (up to 20% blend). These measurements allow the analyser to calculate various aspects of combustion including oxygen content, excess air, CO/CO2 ratio, combustion efficiency and in addition to let by/tightness testing. Test domestic gas, oil, biomass & some light commercial appliances with this completely upgradeable flue gas analyser, featuring wireless connectivity included as standard.

The CO measurement capabilities of the Kane 458s Flue Gas Analyser are particularly impressive. With the latest upgradeable sensor technology protected by an innovative purge pump system providing accidental over range protection for the CO sensor, it can measure ambient CO in addition to CO in the flue. An automatic commissioning test means that the user can perform a test conforming to Technical Bulletin 143 without having to manually pick the test sequence. With the extremely versatile Kane 458s Flue Analyser you can even specify additional sensors either from new or as required.

The large display of the Kane 458s Gas Analyser presents up to six readings simultaneously alongside an easy to use ergonomic rotary dial. The smart design is encased in a robust shell, offers connection to an optional infrared printer through the built-in wireless connectivity alongside a Kane ten year warranty for your flue gas analyser. The Kane 458s is ideal for a range of applications including testing combustion performance, combustion efficiency, CO build-up, tightness and let by and flue draught. The analyser can be used on an array of fuel types such as natural gas, butane, propane, LPG, 28 sec oil, 35 sec oil and wood pellets. The flue gas analyser is available in a range of kits with various accessories as detailed below

Key Features
Carbon monoxide measurement (0 to 20%)
Carbon dioxide measurement (0 to 2000ppm)
Incorporated wireless connection
Differential temperature and pressure measurement
Hydrogen (H2) ready up to 20% blend
Oxygen content calculation
Excess air calculation
CO/CO2 ratio calculation
Efficiency calculation
Let by/tightness testing
Automatic commissioning test sequence on boilers
Purge pump system protects CO sensor from over range
Suitable for wide range of fuels
Kane 10 Year Warranty
Supplied Accessories
Probe
Pressure Connectors
USB Charger
Quick reference guide & analyser calibration certificate

Standalone AnalyserStandard KitPRO KitCPA1 KitOil Kit
Kane 458s Flue Gas Analyser ✔ ✔ ✔ ✔ ✔
Wireless Connectivity ✔ ✔ ✔ ✔ ✔
Probe ✔ ✔ ✔ ✔ ✔
Pressure Connectors ✔ ✔ ✔ ✔ ✔
CO Sensor Purge Pump Protection ✔ ✔ ✔ ✔ ✔
KANE IRP-2 Infra-red printer ✔ ✔ ✔ ✔
Air/liquid temperature probe ✔ ✔
GLD450 Plus Gas Leak Detector ✔ ✔
Pipe Clamp Temperature Probes - - 2 2
Pressure connection hose ✔ ✔
ASP2 Appliance Sampling Probe Kit ✔
Oil pressure test set ✔
Calibration Report ✔ ✔ ✔ ✔ ✔
Carry Case ✔ ✔ ✔ ✔

Kane 458s & Kane 258 Analysers

The Kane 458s Flue Gas Analyser is a formidable tool capable of completing a variety of tasks crucial for commissioning and performing maintenance on gas systems & boilers. The Kane 258 Combustion Flue Gas Analyser meanwhile is an ideal instrument ideal for servicing or installing oil or gas boilers, with less features than the 458s but more affordable.

Kane 258KANE 458s

Applications

Combustion Performance ChecksYesYes
Combustion Efficiency ChecksYesYes
CO safety checks-Yes
Flue Draughts-Yes

Measures
CO 0 - 2,000pmYesYes
O2 0 - 21%YesYes (option)
Differential Temperature-Yes
CO2 direct with an Infra-Red sensor 0 - 20%-Yes
Differential pressure meter +/- 80mbrar-Yes
NO 0 - 600ppm-Yes (option)
CO 0 - 10,000ppm-Yes (option)

Calculates
CO2 0 - 20%YesYes
CO / CO2 ratioYesYes
Excess AirYesYes
Combustion EfficiencyYesYes
O2-Yes

Contents

AnalyserYesYes
ProbeYesYes
USB ChargerYesYes
IRP-2 Infrared PrinterYes (option)Yes (option)
Carry BagYes (option)Yes (option)
Pressure Connectors-Yes
Air / Liquid temperature probe-Yes (option)
GLD450 Plus Gas Leak Detector-Yes (option)
Pipe Clamp Temperature Probes-Yes (option)
Pressure Connection hose-Yes (option)
ASP2 Appliance Sampling Probe Kit-Yes (option)
Oil Pressure test set-Yes (option)
Includes Wireless Module
Transfer analyser readings to your PC using a KANE LIVE software.
Send printout data to your mobile device using the free Kane printer app.

BTM/450
Wireless android module
BTM/450LE
Wireless iOS module

Part Number: Kane 458s Kit

Replaces: Kane 425 Kit, Kane 455 Kit, Kane 456 Kit, Kane 458 Kit

read moreIntaKlean 22mm Central Heating Filter IK2MF22

The IntaKlean 22mm Central Heating Filter IK2MF22 is triple action magnetic central heating filter, featuring intas unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.

As well as separating magnetic debris and trapped air in circulating system fluid, the IK2MF22 22mm Central Heating Filter also includes a completely unique nonferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre. This 22mm IK2MF22 Central Heating Magnetic Filter is on special Offer at Heatingspares247.com.

As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained The remaining magnetic debris is then drawn to the centre of the filter and captured by the 11,000 gauss rare earth neodymium magnet

Features
The intaKlean 2 triple action magnetic central heating filter, featuring inta's unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.
As well as separating magnetic debris and trapped air in circulating system fluid, intaKlean 2 also includes a completely unique nonferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre.
As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained. The remaining magnetic debris is then drawn to the centre of the filter and captured by the 11,000 gauss rare earth neodymium magnet.
Features:
Triple action filter - removes magnetite, non-ferrous debris and trapped air
Features our unique double gauze non-ferrous filter - system fluid passes through two heavy
duty stainless steel mesh filters, breaking up and retaining all non-ferrous system debris.
Fully removable 11,000 Gauss magnet - service the system live by withdrawing the magnet from
the filter without the need for isolation, or system drain down.
Low profile drain valve - drain the filter contents without draining the system.
500ml filter pot volume - ideal for chemical dosing
Un-blockable even if the IntaKlean 2 isn't serviced, it will never inhibit system performance
as its unique diverter block connection means that it will never block
Full bore isolating ball valves - doesnt inhibit flow avoiding putting pressure on system pumps
Easy clean, easy drain design effortless service calls for the installer
Two year guarantee - complimented by a dedicated Technical Support helpline

Specifications:
Actively filters magnetite and non ferrous system debris
Unique double gauze non-ferrous filter
Low profile drain valve
Fully removable 11,000 Gauss magnet - sevice the system live
360 installation
Quality isolation valves
90C max working temperature
Manual air vent
4 bar max working pressure

Part Number: IK2MF2

Replaces Part Number:IKMF22

read moreVaillant Diverter Valve 252457.

This Diverter Valve is a part that only appears in combi boilers, it allows the hot water to be sent to the central heating system (radiators, etc.) or to the hot water system (taps, etc.). This feature is what separates a normal boiler from a combination boiler due to the fact that a combi boiler wouldn't require a cylinder to provide heating and hot water. Weather its a Condensing Combi boiler or a non condensing combi the Diverter Valve part number 252457 functions are the same.

Vaillant Diverter Valve 252457. This part replaces the old Diverter Valve part number Vaillant 0020073799, and this is present in different Vaillant Combination boilers including the Vaillant Turbomax Plus, Vaillant Turbomax Pro and aquaPLUS.

Combi is short for combination, and you can have a Vaillant condensing combination boiler or a standard efficiency combination boiler.

Suitable for:
Vaillant Turbomax Plus 824 GC 47-044-04
Vaillant Turbomax Plus 828 GC 47-044-09
Vaillant Turbomax Plus 837 GC 47-044-28

Part Number: 252457

Replaces Part Number: 0020073799

read moreVaillant Diverter Valve Brass 0020132683, this Vaillant ECOTEC Divrter Valve 0020132683 is a part that only appears in combi boilers, it allows the hot water to be sent to the central heating system (radiators, etc.) or to the hot water system (taps, etc.). This feature is what separates a normal boiler from a combination boiler due to the fact that a combi boiler wouldn't require a cylinder to provide heating and hot water. Weather it's a Condensing Combi boiler or a non condensing combi the Diverter Valve functions are the same.
Combi is short for combination, and you can have a condensing combination boiler or a standard efficiency combination boiler.
The Vaillant Brass diverter valve 0020132683 is also known as the 3 way valve and will replace Diverter Valve 0020132682.

Suitable for:

Vaillant VUW 246/5-5 (2012-CURR)
Vaillant VUW 316/5-5 (2012-CURR)
Vaillant VUW 376/5-5 (2012-CURR)
Vaillant ecoTEC PLUS 824
Vaillant ecoTEC PLUS 831
Vaillant ecoTEC PLUS 837
Vaillant VUW 246/5-5 R1 (2012-CURR)
Vaillant VUW 316/5-5 R1 (2012-CURR)
Vaillant VUW 376/5-5 R1 (2012-CURR)
Vaillant ecoTEC PLUS 824 R1
Vaillant ecoTEC PLUS 831 R1
Vaillant ecoTEC PLUS 837 R1
Vaillant VUI 376/5-5 (2012-CURR)
Vaillant ecoTEC PLUS 937
Vaillant VUI 376/5-5 R1 (2012-CURR)
Vaillant ecoTEC PLUS 937 R1

Part Number: 0020132682
Replaces Part Number: 178978, 20132682

read moreVokera Flame Ignition Module (PCB) 10028891

Suitable for:
Vokera Linea 24
Vokera Linea 28
Vokera Linea 726
Vokera Linea 730
Vokera Linea 735
Vokera Linea Plus AG
Vokera Mynute 28 E
Vokera Mynute 35 E
Vokera Synergy 25E
Vokera Synergy 29
Vokera Synergy 29E
Vokera Syntesi 25
Vokera Syntesi 25E
Vokera Syntesi 29
Vokera Syntesi 29E
Vokera Syntesi 35

Part Number 10028891
Replaces Part Number: 10021848, R10021848, R10028891

read moreVaillant EcoTec Plus Printed Circuit Board (PCB) 0020132764

Suitable for:
Vaillant Ecotec Pro 24 (up to 2012)
Vaillant Ecotec Pro 28 (up to 2012)
Vaillant Ecotec Plus 824 (up to 2012)
Vaillant Ecotec Plus 831 (up to 2012)
Vaillant Ecotec Plus 837 (up to 2012)
Vaillant Ecotec Plus 937 (up to 2012)

Part Number: 0020132764
Replaces Part Number: 0020107811, 117322, 0020052093, 0020028060, 0020049121

read moreIntaKlean 2 28mm Central Heating Magnetic Filter IK2MF28

IntaKlean 2 28mm Central Heating Magnetic Filter IK2MF28 is triple action magnetic central heating filter, featuring intas unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.

As well as separating magnetic debris and trapped air in circulating system fluid, IK2MF28 Central Heating Magnetic Filter also includes a completely unique nonferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre. Central Heating Magnetic Filter IK2MF28.

As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained The remaining magnetic debris is then drawn to the centre of the filter and captured by the 11,000 gauss rare earth neodymium magnet.

Features
The intaKlean 2 triple action magnetic central heating filter, featuring inta's unique double gauze non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems.
As well as separating magnetic debris and trapped air in circulating system fluid, intaKlean 2 also includes a completely unique nonferrous filter which contains two stainless steel gauze filter tubes, one inside the other, with the magnetic filter core at the centre.
As system fluid passes into the intaKlean 2, through a combination of gravity and clever product design, it begins to circulate within the filter body. The fluid passes through the double gauze non-ferrous filter where any foreign matter is broken up or retained. The remaining magnetic debris is then drawn to the centre of the filter and captured by the 11,000 gauss rare earth neodymium magnet.
Features:
Triple action filter - removes magnetite, non-ferrous debris and trapped air
Features our unique double gauze non-ferrous filter - system fluid passes through two heavy
duty stainless steel mesh filters, breaking up and retaining all non-ferrous system debris.
Fully removable 11,000 Gauss magnet - service the system live by withdrawing the magnet from
the filter without the need for isolation, or system drain down.
Low profile drain valve - drain the filter contents without draining the system.
500ml filter pot volume - ideal for chemical dosing
Un-blockable even if the IntaKlean 2 isn't serviced, it will never inhibit system performance
as its unique diverter block connection means that it will never block
Full bore isolating ball valves - doesnt inhibit flow avoiding putting pressure on system pumps
Easy clean, easy drain design effortless service calls for the installer
Two year guarantee - complimented by a dedicated Technical Support helpline

Specifications:
Actively filters magnetite and non ferrous system debris
Unique double gauze non-ferrous filter
Low profile drain valve
Fully removable 11,000 Gauss magnet - sevice the system live
360 installation
Quality isolation valves
90C max working temperature
Manual air vent
4 bar max working pressure

Part Number: IK2MF28
Replaces Part Number: IKMF28, Inta-Klean, Inta, Intaclean, Intafilter, Magnetic Heating Filter

read moreAbsolutely brilliant service. Had the part I required in store and without the need for ordering in. Friendly and helpful service to boot and very reasonably priced. More than happy to recommend.

read moreCan't fault them, had the parts I needed and also happy to split a pack of 10 washers. I'll be calling back soon.

read moreExcellent place to buy your spares for your boiler, one of the best places i have found , if not the only one.

read moreWeather your looking for a Boiler, Heating Parts, Central Heating Controls, Radiators, Valves, Central Heating Filters or Gas Analysers, look no further. We have the Gas Spares in stock, ready for immediate dispatch or Trade Counter Pick Up. We are now open from Monday to Friday from 8.00 AM till 5.30 PM and Saturdays 8.00AM till 4.30PM. All orders placed before 3.45 PM for the UK mainland will be dispatched the same working day except for weekends and bank holidays. Orders placed after 3.45 PMfor UK mainland or during weekends and bank holidays will be dispatched the following working day.

read moreEstablished in 2003 by a highly experienced and professional heating engineer Heatingspares247.com has progressed a long way from its original roots. Our core team comprises of several experienced professional, who have a better understanding of our customer requirements and are able to offer a superior service in sourcing and stocking original & Genuine Manufacturer Boiler Parts. Our customer base includes commercial (trade) customers as well as domestic (private) customers who are in need of boiler spares for their heating systems.