Freeflush Rainwater Harvesting

read moreIf youre limited in space, wall hung water butts may be the way to go. They allow you to retain all of your available ground space for other uses. They also have a more slimline design than the ground models, and are therefore more unobtrusive. Since they are higher up, an additional benefit is that they allow you to fill your watering can without bending over.

Unlike the standard water butts, which are placed on the ground, you can use a hose comfortably with these models. If the water butt was on the ground it would be too low to supply the necessary pressure to allow the use of a hose. With a wall mounted water butt the pressure is high enough to allow this, but is still low enough not to blow the petals of your flowers when youre gardening − the pressure is typically 0.1 bar.

read moreFiltration is an integral part of rainwater harvesting systems. Filtration typically removes contaminants such as dust, leaves and organic debris from water butts, tanks and IBCs. Even if the water isnt being used for drinking it is useful to remove these contaminants as they can cause blockage in the downstream system in the long term. If your diverter does not filter the water, you can place a filter somewhere else in the system − such as on the downpipe and/or in suction inlet of your pump.

read moreI'm very happy with my rainwater harvesting package from Freeflush. Excellent guidance from the Freeflush team. Looking forward to the summer when I can use it!

read moreGreat product. Extremely pleasant and knowledgeable staff, very easy to deal with from start to finish. Would highly recommend. Thanks again.

read moreProvided clear advice on the water container product required for the application which I described and the item was delivered to me within two days.

read moreThis is an excellent way to reduce your water use and to save money. Highly recommended.

read moreI am on a water meter & was looking for ways to reduce my bills. Freeflush are really helpful & knowledgable on the subject & after finding out when the savings were I cant believe I didnt approach them sooner! Everything was set up quickly & the water tank discreetly fitted and secured to the house. Excellent service & savings- thanks Freeflush!

read moreAt Freeflush we design, supply and install integrated water solutions. We understand the challenges facing businesses and consumers and help them reduce their water overheads. Our products and services cover; Rainwater harvesting, Stormwater, Waste Water, Irrigation, Drinking Water and other Water Saving technologies. Rainwater harvesting is a simple process of collecting and storing rainwater that falls on a catchment surface for re use. Typically this requires a storage unit and a means to convey the captured rainwater to where it is required.

read moreHowever in many cases this capacity may not be required due to low demand or rainwater being used for only one application. For example a 1,000l provides 200 low volume toilet flushes, enough for8low volume flushes a day for over25 days! In the UK, typically, it rains every 3 days. The majority of underground rainwater harvesting system start at 1,500l. In the UK, typically, it rains. Infiltration may not be possible due to due poor ground conditions (impermeable clay) or limitedspace. This below ground rainwater attenuation tank is a an excellent solution for small drainage areas for which SuDS are required.